Rocker Horse
Check out this page if you are looking for Rocker Horse
![]() |
![]() New Fergie Frog Rocker Musical Rocking Horse Animal US $96.99
|
![]() New Bi Plane Airplane Rocker Musical Rocking Horse US $96.99
|
![]() VINTAGE PEG PEREGO ROCKING HORSE ROCKER 1970S COLLECTIBLE US $169.00
|
![]() Levels Kids Kiddie Ups Prince Rocking Horse Rocker NEW US $159.95
|
![]() New Puppy Dog Pirate Ship Rocker Musical Rocking Horse US $103.99
|
![]() New Blaze Fire Truck Rocker Musical Rocking Horse US $103.99
|
![]() KIDDIE UPS COWBOY ROCKING HORSE ROCKER KIDS CHILD CHAIR US $159.95
|
![]() KIDDIE UPS PRINCE ROCKING HORSE ROCKER KIDS CHILD CHAIR US $159.95
|
![]() KIDDIE UPS CAROUSEL ROCKING HORSE ROCKER CHILDS CHAIR US $159.95
|
![]() KIDDIE UPS PRINCESS ROCKING HORSE ROCKER CHILDS CHAIR US $159.95
|
![]() KidKraft Wooden Derby Cherry Color Rocker Rocking Horse US $90.25
|
![]() KidKraft Derby Wooden Rocker Honey Rocking Horse US $95.00
|

Chevy 355 horse power?
Ok I asked this question a week ago but things have changed.ok its all new equipment its a 350 bored .40 over 4 bolt main. I have a carter 4 barrel 600 cfm carb. Long tube hooker headers 2.5 pipe to trush muffelers. Edelbrok rpm performer intake. The heads are old cast fuelly heads and have 202 intake 160 exhaust 62 cc chamber standard deck height. The gasket is standard fel pro. Standard rockers and push rods. The cam is 292 advertized but 230 duration at 50 degrees on intake and exaust the lift is 480 for both. Lobe seperation is 109 lsa. High volume oil pump. The pistons are dual vavle releief with a .125 dome and 3 cc valve reliefs. Standard 350 stroke. Double roller chain. And a 2500 stall converter. Msd distributor. what kinda horse power and torque am I lookin at? And what would my compression be?
I built something like that back in the mid-eighties. If I'm right, that piston yields a 10.49 CR. The cam was a Crower with 224@ .050. The cranking compression was 175 PSI. I've run that Lunati cam too. It's ground two degrees advanced and installs at 107 centerline when straight up on the timing chain. I had several people comment that they liked the sound of that engine. Considering a 441 head and that cam is right at one horse per cubic inch, I'm going to say you might get 365-370 HP, with those fuelie heads. I might build this in Engine Jr. just to check it. I'll e-mail you what I get.
Edit:It "made" 367 HP@ 5,650 RPM, 380 lb/ft.@4,400 RPM using 220 CFM @ 28" of H2O



US $52.94











































